WAS W257 Driving light with position BLACK
WAS W257 Driving light with position BLACK
SKU:2176 BLACK
WAS
Couldn't load pickup availability
The W257 multifunctional front lamps are a distinctive series of lamps, distinguished by their unique design. W257 lamps come in various light configurations, they can fulfil the functions of: driving light, front position light, as well as side position light, depending on the customer's choice and needs. The unusual modules of the front position light with logo and side marker light, consist of neon lenses.
The W257 series lamp is 7 inches in diameter. The external lens has been reinforced with a layer of special coating which increases scratch resistance and reduces tarnishing of the lens. In contrast, the lamp bodies were created from high-quality aluminium, double protected against corrosion.
The lamps W257 meet all approval requirements, including electromagnetic compatibility. They also meet the IP6K9K standard for moisture resistance and dust ingression. In addition, they are fully LED, and therefore energy-saving, as well as universal voltage, operating in the range of 12 – 24V.
Specification
Specification
7" Driving Light 9000lm
Protection: IP69K
Voltage: 12/24V
Lens: PC with scratch resistant coating
Body: Aluminuim with double corrosion protection
ECE R10
Installation and care
Installation and care
To preserve the quality of your lights, do not utilise a pressure washer on a high setting.
The use of harsh cleaning chemicals can detrimentally effect the appearance and life of the product. Use warm soapy water and a wash brush or clean sponge to thoroughly clean front and back and rising to remove all soap.
With today’s high-quality lighting offering excellent dust and water sealing, lamp failures are rare. One common cause is water tracking through unsealed electrical connections, causing the copper core to blacken. Using waterproof plugs and sockets (superseals or Deutsch connectors) and adhesive heat-shrink sleeving and terminals can prevent this issue.
Additional Information
Additional Information
Condensation is a natural occurrence and is not a cause for concern. These units are designed with vents to accommodate fluctuations in air pressure, which can lead to condensation. When moist air enters the lamp assembly, condensation can form, particularly at low temperatures. This condensation typically manifests as a fine mist on the interior of the lens. However, this mist eventually dissipates and exits through the vents during normal operation.
Shipping
Shipping
Orders placed before 2pm
Processed & shipped the same day unless otherwise stated.
Orders placed after 2pm
Processed & shipped the next working day.
Orders placed after 2pm on a Friday.
Processed & shipped the following Monday.
Orders are shipped Monday-Friday only.
Share
